LITE HUB STANDS

Classic Porsche 911 on NP Lite hub stand system for string alignment

The Lite Hub Stand System is an amateur-grade home wheel alignment, suspension setup and measurement system designed for simplicity, accuracy, and ease of use. Engineered primarily for string alignment setups, with the option to upgrade by adding laser alignment modules separately. Featuring a non-adjustable design with a universal mounting pattern compatible with all 4 and 5-hole PCDs ranging from 98 to 130. Like all our products, it is designed, CNC machined, and assembled in-house at NP Parts in Lithuania. A reliable and cost-effective solution for enthusiasts, workshops, and amateur racing teams. It is built for home wheel alignment – string alignment at home, without an alignment rack.

DESIGNED AND MACHINED IN LITHUANIA! 🇱🇹

Home Wheel Alignment: All Measurements With One System

Digital angle reader on an NP Lite hub stand for camber measurement

Camber/Caster (With additional tool)

NP Lite hub stand with string alignment offset bar for home wheel alignment

Toe Measurement

Camber/Caster

Digital angle reader on an NP Lite hub stand for camber measurement

Camber and caster are related suspension angles measured using the digital dual-axis angle reader, available separately as an optional accessory.

Caster Measuring Formula

Procedure:

  1. Turn the wheel 15° to the left of center and record the camber reading.
  2. Turn the wheel 15° to the right of center and record the camber reading.
  3. Caster = (right reading − left reading) × 2

Example

Left: −1.0°, Right: +0.5° → (0.5 − (−1.0)) × 2 = 3.0° caster

Toe Measurement

NP Lite hub stands universal PCD full kit with alignment offsets

TOE measurement is performed using the string alignment method, with alignment offsets included in the hub stand kit for accurate setup. A laser alignment system is also available separately as an optional upgrade.

Suspension Adjustment

Coilover suspension adjustment on a race car during hub stand setup

Suspension adjustments are easily accessible with the vehicle positioned on hub stands, as the wheels are removed and do not obstruct access.

This allows faster and more precise coilover adjustments as well as accurate suspension geometry setup.

Client pictures and feedback

NP Lite hub stand on a race car hub with corner weight scales

★★★★★

Perfect setup solution for our Supra. Super accurate, easy to use, and the quality is outstanding

– Marco

★★★★★

“The Lite Hubstands are the perfect tool for both my home garage and the workshop. I can do all my suspension work and easily measure toe with great accuracy. Simple, effective, and an amazing tool for the price.”

— Kyle

VW Golf race car on NP Lite hub stands during string alignment in the pit garage

Home Wheel Alignment FAQ

Can I do a home wheel alignment with hub stands?

Yes. NP Lite hub stands bolt onto the wheel hubs in place of the wheels, so the car sits on four fixed reference points. With the included string alignment offsets you can measure and set toe in your own garage, without an alignment rack or a four-post lift. As with any wheel alignment, a flat and level floor gives the best results.

How does string alignment at home work?

Two strings are run along both sides of the car, parallel to each other and to the centreline of the car. The alignment offsets on the Lite hub stands give you a fixed measuring point at every hub, so you measure from the string to the front and rear of each offset and read toe from the difference.

Can I measure camber and caster during a home wheel alignment?

Yes, with the digital dual-axis angle reader, available separately. It attaches to the magnetic plate on the Lite hub stand. Caster is calculated from two camber readings taken with the wheel turned 15° left and 15° right of centre, as shown above.

Which cars do the Lite hub stands fit?

The Lite hub stands use a universal mounting pattern for all 4- and 5-hole PCDs from 98 to 130, so one set covers most road and track cars.

Can I upgrade from string to laser alignment later?

Yes. The Lite system is built for string alignment first, and laser alignment modules can be added separately. If you need adjustable hub stands or integrated corner weight scales, compare the Pro and Elite systems.

Why measure at the hub instead of the tyre?

The hub is a fixed reference point, while tyres vary in size, pressure and wear, and rims can be bent. Measuring at the hub makes every home wheel alignment consistent and repeatable, and with the wheels off you get easy access to coilovers and suspension arms.

Get the Lite Hub Stand System

See prices and order the NP Lite Hub Stands universal PCD kit – or compare it with our Pro and Elite systems.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.